Effect of oral exposure on chemical, physical, mechanical, and morphologic properties of clear orthodontic aligners

The dental industry is heavily committed to developing more esthetic solutions for orthodontic treatments. Invisalign is a system of transparent orthodontic aligners introduced as an alternative to conventional orthodontic fittings with brackets and metal wires. This study aimed to assess the chemical, physical, mechanical and morphologic changes in these polymeric aligners after exposure to the oral environment. Twenty-four Invisalign orthodontic aligners were equally divided into 2 groups: an in vivo aged group in which patients used aligners for 14 days and the reference group, unexposed to the oral environment. Different experimental techniques were used to study the chemical structure, the color changes and translucency, the density and subsequent volume of the aligners, mechanical properties, surface roughness, morphology and elemental composition. The data were subjected to several statistical analyses. Clear orthodontic aligners exhibit chemical stability but undergo a statistically significant optical change in color and translucency. There was a gradual increase in the water absorption rate and the dimensional variation of the polymer, indicating a strong correlation among these factors. The mechanical properties of the polymer showed a statistically significant decrease in its elastic modulus and hardness. There was a slight tendency toward increased surface roughness of the material, but no statistical differences were found between reference and aged groups. The surface morphology of the used aligners demonstrates microcracks, distortions and biofilm formation. Intraoral aging adversely affected the physical, mechanical, and morphologic properties of the Invisalign appliance.

Relação entre desmame precoce, desenvolvimento de hábitos bucais deletérios e maloclusões na infância / Relationship between early weaning, development of harmful oral habits and malocclusions in childhood

Objetivo: o objetivo desta pesquisa foi analisar a associação do tempo de aleitamento materno com a prática de hábitos deletérios e o desenvolvimento de maloclusões na primeira infância. Materiais e Métodos: foram aplicados 171 formulários às mães com 18 anos ou mais que acompanharam o processo de amamentação de seu(s) filho(s) de 4 a 10 anos de idade. O questionário foi composto por 22 perguntas, sendo 15 específicas e relacionadas ao aleitamento, hábitos deletérios da criança (uso de chupeta, sucção de dedo e sucção do próprio lábio) e maloclusões específicas (mordida cruzada posterior, mordida cruzada anterior e mordida aberta). Resultados: a prevalência da amamentação exclusiva por 6 meses ou mais foi de 52%, enquanto 29,8% das crianças foram amamentadas de 0 a 5 meses e 18,2% nunca foram amamentadas no seio exclusivamente. Quanto a alimentação complementar, grande parcela (37,4%) encontrada evidenciou início após os 6 meses; 57,9% das mães relataram algum tipo de dificuldade para amamentar e 34,5% das crianças fizeram uso de chupeta. Em relação aos hábitos deletérios, 10% desenvolveram sucção de dedo. O relato de desenvolvimento de maloclusões foi de 9,4% das crianças com mordida cruzada posterior; 7,6% mordida cruzada anterior e 18,7% mordida aberta anterior. Conclusão: sendo assim, é possível inferir que o tempo preconizado pela Organização Mundial da Saúde para aleitamento materno exclusivo foi fundamental para o não desenvolvimento de hábitos deletérios e maloclusões. Em contrapartida, quanto mais cedo a introdução de alimentos complementares, e a interrupção do aleitamento exclusivo nos seis primeiros meses, maior o risco do desenvolvimento de hábitos e consequentemente maloclusões.

Objective: the objective of this research was to analyze the association of breastfeeding duration with the practice of deleterious habits and the development of malocclusions in early childhood. Materials and Methods: a total of 171 forms were applied to mothers aged 18 years or older who followed the breastfeeding process of their child(ren) between 4 and 10 years of age. The questionnaire consisted of 22 questions, 15 of which were specific and related to breastfeeding, the child's deleterious habits (use of a pacifier, finger sucking and lip sucking) and specific malocclusions (posterior crossbite, anterior crossbite and open bite). Results: the prevalence of exclusive breastfeeding for 6 months or more was 52%, while 29.8% of children were breastfed from 0 to 5 months and 18.2% were never exclusively breastfed. As for complementary feeding, a large portion (37.4%) found to start after 6 months; 57.9% of the mothers reported some type of difficulty in breastfeeding and 34.5% of the children used a pacifier. Regarding deleterious habits, 10% developed finger sucking. The report of development of malocclusions was 9.4% of children with posterior crossbite; 7.6% anterior crossbite and 18.7% anterior open bite. Conclusion: therefore, it is possible to infer that the time recommended by the World Health Organization for exclusive breastfeeding was fundamental for the non-development of deleterious habits and malocclusions. On the other hand, the earlier the introduction of complementary foods and the interruption of exclusive breastfeeding in the first six months, the greater the risk of developing habits and, consequently, malocclusions.

Effect of cigarette smoke on aesthetic brackets: an in vitro study.

OBJECTIVE: The objective of this study was to evaluate the effect of cigarette smoke (CS) on physical and mechanical properties of ceramic, polycarbonate and alumina ceramic brackets. The null hypothesis tested was that aesthetic brackets would not be influenced by CS. METHODS: Ninety aesthetic brackets were allocated to three groups (n = 30): ceramic (GCE), polycarbonate (GCO) and alumina ceramic (GPS). Ten samples of each group were assigned to color and surface roughness analysis, performed before (T0) and after (T1) exposure to CS; and twenty samples were allocated into control and experimental groups (n = 10) (not exposed and exposed to CS, respectively) for shear bond strength test (SBS). Exposure to CS followed an adaptation of the method described by Le Mesurier. Colorimetric reading, surface morphology and roughness, SBS and adhesive remnant index (ARI) were assessed. Statistical analysis comprised independent and paired t-tests, ANOVA/Tukey and Fisher's exact tests (α = 0.05). RESULTS: Changes were observed in brackets' color (NBS: GCE = 2.4; GCO = 1.9; GPS = 2.1), surface roughness (ΔRa: GCE = 1.1 ± 0.8 µm; GCO = 1.9 ± 1.5µm; GPS = -0.3 ± 0.1 µm / ΔRz: GCE = 1.4 ± 1.0 nm; GPS = -0.5 ± 0.1 nm); and SBS (GPS - experimental = 221.8 ± 48.6 N) after exposure to CS (p< 0.05). CONCLUSIONS: Exposure, in vitro, of aesthetic brackets to CS resulted in changes of color to darker and more opaque shades, surface roughness alterations, and higher SBS values. ARI scores were not associated with exposure to CS.

Effect of cigarette smoke on aesthetic brackets: an in vitro study

ABSTRACT Objective: The objective of this study was to evaluate the effect of cigarette smoke (CS) on physical and mechanical properties of ceramic, polycarbonate and alumina ceramic brackets. The null hypothesis tested was that aesthetic brackets would not be influenced by CS. Methods: Ninety aesthetic brackets were allocated to three groups (n = 30): ceramic (GCE), polycarbonate (GCO) and alumina ceramic (GPS). Ten samples of each group were assigned to color and surface roughness analysis, performed before (T0) and after (T1) exposure to CS; and twenty samples were allocated into control and experimental groups (n = 10) (not exposed and exposed to CS, respectively) for shear bond strength test (SBS). Exposure to CS followed an adaptation of the method described by Le Mesurier. Colorimetric reading, surface morphology and roughness, SBS and adhesive remnant index (ARI) were assessed. Statistical analysis comprised independent and paired t-tests, ANOVA/Tukey and Fisher's exact tests (α = 0.05). Results: Changes were observed in brackets' color (NBS: GCE = 2.4; GCO = 1.9; GPS = 2.1), surface roughness (ΔRa: GCE = 1.1 ± 0.8 µm; GCO = 1.9 ± 1.5µm; GPS = -0.3 ± 0.1 µm / ΔRz: GCE = 1.4 ± 1.0 nm; GPS = -0.5 ± 0.1 nm); and SBS (GPS - experimental = 221.8 ± 48.6 N) after exposure to CS (p< 0.05). Conclusions: Exposure, in vitro, of aesthetic brackets to CS resulted in changes of color to darker and more opaque shades, surface roughness alterations, and higher SBS values. ARI scores were not associated with exposure to CS.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar os efeitos da fumaça do cigarro (FC) nas propriedades físicas e mecânicas de braquetes cerâmicos, de policarbonato e de cerâmica de alumina. A hipótese nula testada foi de que os braquetes estéticos não seriam influenciados pela FC. Métodos: Noventa braquetes estéticos foram alocados em três grupos (n = 30): cerâmica (GCE), policarbonato (GCO) e cerâmica de alumina (GPS). Dez amostras de cada grupo foram designadas para análise de cor e rugosidade superficial, realizada antes (T0) e após (T1) exposição à FC, e vinte amostras foram alocadas nos grupos controle e experimental (n = 10) (não expostos e expostos à FC, respectivamente) para o teste de resistência ao cisalhamento (RC). A exposição à FC foi realizada de acordo com o método descrito por Le Mesurier. Leitura colorimétrica, morfologia e rugosidade de superfície, RC e índice de adesivo remanescente (ARI) foram avaliados. A análise estatística foi realizada por meio dos testes t independente e para amostras pareadas, ANOVA/Tukey e teste exato de Fisher (α = 0,05). Resultados: Foram observadas alterações na cor (NBS: GCE = 2,4; GCO = 1,9; GPS = 2,1), rugosidade superficial (ΔRa: GCE = 1,1 ± 0,8 µm; GCO = 1,9 ± 1,5 µm; GPS = -0,3 ± 0,1 µm / ΔRz: GCE = 1,4 ± 1,0 nm; GPS = -0,5 ± 0,1 nm) e RC (GPS - experimental = 221,8 ± 48,6 N) dos braquetes após exposição à FC (p< 0,05). Conclusões: A exposição in vitro de braquetes estéticos à FC resultou em mudanças na cor, para tons mais escuros e mais opacos; alterações na rugosidade superficial e maiores valores de RC. Os resultados do ARI não foram associados à exposição à FC.

Reasons influencing the preferences of prospective patients and orthodontists for different orthodontic appliances.

OBJECTIVE: To evaluate the reasons influencing the preferences for a certain type of orthodontic appliance over another among prospective patients (PP) and orthodontists. METHODS: A total of 49 PP and 51 orthodontists were asked about their preferences for the following appliances: clear aligners (CA), lingual metallic brackets (LMB), polycrystalline and monocrystalline ceramic brackets, and buccal metallic brackets (BMB). The participants rated the importance of 17 potential reasons that would explain their choices. The reasons that contributed most to these preferences were identified. Non-parametric tests (Fisher's exact, χ2 and Mann-Whitney tests) and multivariate analyses (regression and discriminant analysis) were used to assess the data (α = 0.05). RESULTS: CA and BMB were the most chosen appliances by PP and orthodontists, respectively. LMB was the most rejected option among both groups of participants (p < 0.001). Rates of the importance of pain/discomfort, smile esthetics, finishing details, and feeding/speech impairment showed the highest differences between PP and orthodontists (p < 0.0005). Discriminant analyses showed that individuals who considered treatment time and smile esthetics as more important were more likely to prefer CA, while those who prioritized finishing details and cost were more likely to choose BMB (p < 0.05). CONCLUSIONS: Reasons related to comfort and quality of life during use were considered as more important by PP, while those related to the results and clinical performance of the appliances were considered as more relevant by orthodontists.

Anterior open bite treated with palatine crib: a case report with cephalometric, speech and electromyography analyses

This case report describes an interceptive treatment of anterior open bite (AOB) with fixed palatine grid using clinical, cephalometric, electromyographic and speech analysis data. Case report: An 8-year-old girl, Angle Class I malocclusion presenting AOB. The complete orthodontic documentation was obtained and the perioral muscles were evaluated using the electromyography during blowing, sucking and smiling activities, before and after treatment. Speech acoustic evaluation was performed through the frequencies of the formants to assess the position of the tongue. Results: The AOB was corrected in six months with reduction of vertical transpass, decrease of cephalometric Angles 1: NA and 1: NB and increase of interincisal angle. During the smile movement, it was possible to observe the decrease of the muscular activity of the superior orbicularis muscle and the increase of the muscular activity of the inferior orbicularis. In the blow movement, there was a tendency to decrease muscle activity. Opposite directions were observed at the time of installation of the grid in the frequencies of the formants. When the grid was removed, the tongue was lowered and posteriorized in relation to the installation time. When compared the final and initial moments, it was noted a predominance of tongue lower position, besides posteriorization in some vowels and anteriorization in others. Conclusion: After the use of the fixed palatine crib as an interceptive treatment for AOB, the bite was closed and it was possible to observe an harmony in the patient profile and improvement in periorbital musculature and tongue positioning.

Objetivo: Este relato de caso descreve um tratamento interceptivo da mordida aberta anterior (MAA) com grade palatina fixa usando dados clínicos, cefalométricos, eletromiográficos e de fala. Relato do caso: Menina de 8 anos de idade apresentando maloclusão Classe I de Angle e MAA. A documentação ortodôntica completa foi obtida e os músculos periorais foram avaliados pela eletromiografia durante as atividades de sopro, sucção e sorriso, antes e após o tratamento. A avaliação acústica da fala foi realizada através das frequências dos formantes para avaliar a posição da língua. Resultados: O MAA foi corrigida em seis meses com redução do transpasse vertical, diminuição dos ângulos cefalométricos 1: NA e 1: NB e aumento do ângulo interincisivo. Durante o movimento do sorriso, foi possível observar a diminuição da atividade muscular do músculo orbicular superior e o aumento da atividade muscular do orbicular inferior. No movimento do sopro, houve uma tendência a diminuir a atividade muscular. Direções opostas foram observadas no momento da instalação da grade nas frequências dos formantes. Quando a grade foi removida, a língua foi abaixada e posteriorizada em relação ao tempo de instalação inicial do aparelho. Quando comparados os momentos final e inicial, observou-se predomínio da posição inferior da língua, além de posteriorização em algumas vogais e anteriorização em outras. Conclusão: Após o uso da grade palatina fixa como tratamento interceptivo para a MAA, a mordida foi fechada e foi possível observar harmonia no perfil da paciente e melhora da musculatura periorbital e posicionamento da língua.

Mapping of supernumerary elements in patients seeking orthodontic treatment

Dimension, number and shape alterations are frequently observed dental anomalies. Objective: The aim of this study was to map the frequency, the preferred location and the most prevalent types of supernumerary teeth, in the studied population. In addition, to assess the interference that supernumerary teeth may cause in the ectopic eruption of the normal dental series teeth. Methods: This is an observational retrospective study. Data collection was performed by evaluation of dental records of patients treated in an orthodontic clinic. Patients' radiographs, photographs and gypsum dental models were analyzed and data recorded in protocol files, by previously trained undergraduate and postgraduate students. Records from 1984 to 2019 were evaluated, and evaluation lasted two months. Data were stored in Microsoft Office Excel (version 2016) for descriptive analysis. Results: From the 920 patients' records analyzed, 2.7% presented at least one supernumerary tooth, with preferred location on the anterior maxillary area and mandibular parapremolar area. The most prevalent type was the supplemental tooth, with normal eruption orientation and normal alveolar location. Conclusion: The supernumerary teeth of the studied population showed little interference in the ectopic eruption of the normal dental series. Most of the supernumerary teeth were impacted, and, approximately one third of the supernumerary teeth showed deviated eruptions.

Introdução: Alterações de dimensão, número e forma são anomalias dentárias comumente observadas. Objetivo: O objetivo foi mapear a frequência de dentes supranumerários na população estudada, sua localização preferida e os tipos mais prevalentes. Além disso, avaliar a interferência que os dentes supranumerários podem causar na erupção ectópica da série dental normal. Métodos: A pesquisa possui desenho retrospectivo observacional. A coleta de dados foi realizada pela avaliação de prontuários odontológicos dos pacientes atendidos em uma clínica ortodôntica. Foram analisados radiografias, fotografias e modelos de gesso dental dos pacientes e as informações foram registradas em arquivos de protocolo do estudo. A coleta de dados foi realizada por uma estudante de graduação e uma da pós-graduação, previamente calibradas. A coleta durou dois meses e foram avaliados registros de 1984 a 2019. Os dados foram tratados no programa Microsoft Office Excel (version 2016) com análise descritiva dos dados. Resultados: Dos 920 prontuários analisados, 2,7% apresentavam pelo menos um dente supranumerário, com localização preferida na área superior anterior e na área parapremolar mandibular. O tipo mais prevalente foi o dente suplementar, com orientação de erupção normal e localização alveolar normal. Conclusão: Os dentes supranumerários da população estudada neste estudo mostraram pouca interferência na erupção ectópica da série dental normal. A maioria dos dentes supranumerários estava em posição de impactação. E, aproximadamente um terço dos dentes supranumerários apresentaram desvios de erupção.

Impaction of mandibular third molars after orthodontic treatment by the edgewise method: a retrospective study.

This study aimed to determine the incidence of mandibular third molar (M3) impaction after orthodontic treatment by edgewise appliances, and identify possible determinant factors of M3 impaction. A retrospective cohort study was conducted with 1154 patients. Complete orthodontic records were analyzed pretreatment and posttreatment, considering the following variables: type of Angle malocclusion, treatment with or without extraction of first premolars, overbite, stage of dentition, M3 prior angulation and duration of orthodontic treatment. Impaction was determined after radiographic evidence of total closure of the root apex. The chi-square test and Poisson regression (p < 0.05) were used for statistical analysis with a hierarchical approach. Rate ratios (RR) and 95% confidence intervals (CI) were calculated. Mandibular M3 impaction incidence was 17%. Overbite equal to or greater than 4 mm (RR = 1.23, 95%CI: 1.11-1.26, p < 0.001), prior mesial angulation of M3 (RR = 0.59, 95%CI: 0.52-0.68, p < 0.001), non-extraction of first premolars (RR=1.06, 95%CI: 1.01-1.12, P=0.019) and orthodontic treatment time equal to or less than three years (RR = 0.94. 95%CI: 0.90-0.99, p < 0.014) were significantly associated with impacted M3. There was no correlation between the type of Angle malocclusion and the risk of impaction. In conclusion, the incidence of mandibular M3 impaction was considered low. The main pretreatment factors directly involved in impaction were mesioangulation of M3 and overbite equal to or greater than 4 mm. Orthodontic treatment with extraction of first premolars and treatment time greater than 3 years reduce the risk of impaction.

Impaction of mandibular third molars after orthodontic treatment by the edgewise method: a retrospective study

Abstract This study aimed to determine the incidence of mandibular third molar (M3) impaction after orthodontic treatment by edgewise appliances, and identify possible determinant factors of M3 impaction. A retrospective cohort study was conducted with 1154 patients. Complete orthodontic records were analyzed pretreatment and posttreatment, considering the following variables: type of Angle malocclusion, treatment with or without extraction of first premolars, overbite, stage of dentition, M3 prior angulation and duration of orthodontic treatment. Impaction was determined after radiographic evidence of total closure of the root apex. The chi-square test and Poisson regression (p < 0.05) were used for statistical analysis with a hierarchical approach. Rate ratios (RR) and 95% confidence intervals (CI) were calculated. Mandibular M3 impaction incidence was 17%. Overbite equal to or greater than 4 mm (RR = 1.23, 95%CI: 1.11-1.26, p < 0.001), prior mesial angulation of M3 (RR = 0.59, 95%CI: 0.52-0.68, p < 0.001), non-extraction of first premolars (RR=1.06, 95%CI: 1.01-1.12, P=0.019) and orthodontic treatment time equal to or less than three years (RR = 0.94. 95%CI: 0.90-0.99, p < 0.014) were significantly associated with impacted M3. There was no correlation between the type of Angle malocclusion and the risk of impaction. In conclusion, the incidence of mandibular M3 impaction was considered low. The main pretreatment factors directly involved in impaction were mesioangulation of M3 and overbite equal to or greater than 4 mm. Orthodontic treatment with extraction of first premolars and treatment time greater than 3 years reduce the risk of impaction.

Lifestyle and oral facial disorders associated with sleep bruxism in children.

OBJECTIVE: The aim of the study was to investigate the routine, sleep history, and orofacial disorders associated with children aged 3-7 years with nocturnal bruxism. METHODS: Children (n = 66) were divided into groups of parent reported nocturnal bruxism (n = 34) and those without the disorder (n = 32). Data about the child's routine during the day, during sleep and awakening, headache frequency, temporomandibular joint (TMJ), and hearing impairments were obtained through interviews with parents/caregivers. Electromyography examination was used to assess the activity of facial muscles. Multiple logistic regression (MLR), chi-square test, and t-test analyses were performed. RESULTS: MLR revealed association of nightmares (p = 0.002; OR = 18.09) and snoring (p = 0.013; OR = 0.14) with bruxism. Variables related to awakening revealed an association with bruxism (p < 0.05). Parents of the main group (children with nocturnal bruxism) reported more complaints of orofacial pain, facial appearance, and headache occurrence (p < 0.05). Auditory and muscle disorders were not significant variables (p > 0.05). CONCLUSION: Nightmares and snoring are associated with nocturnal bruxism in children. Bruxism in children elicits consequences such as headache, orofacial pain, and pain related to awakening.

Transverse effects on the nasomaxillary complex one year after rapid maxillary expansion as the only intervention: A controlled study

The aim of this study was to assess by means of cone-beam computed tomography (CBCT) scans the transverse effects on the nasomaxillary complex in patients submitted to rapid maxillary expansion (RME) using Haas expander in comparison to untreated individuals. This prospective controlled clinical study assessed 30 subjects (18 boys and 12 girls) with mixed dentition and during pubertal growth. The treated group was submitted to RME with Haas expander, retention for six months and a six-month follow-up after removal. The control group matched the treated group in terms of age and sex distribution. CBCT scans were taken at treatment onset and one year after the expander was activated. Maxillary first molars (U6) width, right and left U6 angulation, maxillary alveolar width, maxillary basal width, palatal alveolar width, palatal base width, right and left alveolar angulation, palatal area, nasal base width, nasal cavity width and inferior nasal cavity area on the posterior, middle and anterior coronal slices were measured with Dolphin Imaging Software(r) 11.5, except for the first two variables which were performed only on the posterior slice. All transverse dimensions increased significantly (P < 0.05) in the treated group in comparison to the control, except for alveolar angulation and inferior nasal cavity area (P > 0.05). Results suggest that increase of molar, maxillary, palatal and nasal transverse dimensions was stable in comparison to the control group one year after treatment with RME.

OBJETIVO: avaliar, por meio de tomografias computadorizada de feixe cônico (TCFC), as dimensões transversais do complexo nasomaxilar de pacientes submetidos à expansão rápida da maxila (ERM) e sem intervenção. MÉTODOS: este estudo clínico prospectivo e controlado avaliou 30 indivíduos (18 meninos e 12 meninas) durante o período de crescimento puberal e dentição mista. O grupo tratado foi submetido à ERM com expansor de Haas, permanecendo 6 meses em contenção e sendo acompanhados por mais 6 meses após a remoção. O grupo controle foi acompanhado durante o mesmo tempo. Foram realizadas TCFC ao início e um ano após a fase ativa. Com o programa Dolphin Imaging 11.5, a largura entre os primeiros molares superiores (U6), angulação dos U6 direito e esquerdo, largura maxilar alveolar, largura maxilar basal, largura alveolar do palato, largura basal do palato, angulação alveolar direita e esquerda, área palatina, largura da base nasal, largura da cavidade nasal e área da cavidade nasal inferior foram obtidas em cortes coronais posterior, médio e anterior, com exceção das duas primeiras medidas, que foram obtidas apenas no corte coronal posterior. RESULTADOS: todas as medidas foram significativamente (p < 0,05) maiores no grupo da ERM, com exceção da angulação alveolar e da área da cavidade nasal, as quais não foram significativas (p > 0,05) entre os grupos. Os resultados sugerem que, um ano após a ERM, a dimensão transversal na cavidade nasal, maxila, palato e região dos molares são maiores do que em indivíduos não tratados. O protocolo de ERM utilizado foi eficaz na manutenção da dimensão transversal durante período de acompanhamento. .

Are self-ligating brackets related to less formation of Streptococcus mutans colonies? A systematic review

OBJECTIVE: To verify, by means of a systematic review, whether the design of brackets (conventional or self-ligating) influences adhesion and formation of Streptococcus mutans colonies. METHODS: Search strategy: four databases (Cochrane Central Register of Controlled Trials, Ovid ALL EMB Reviews, PubMed and BIREME) were selected to search relevant articles covering the period from January 1965 to December 2012. Selection Criteria: in first consensus by reading the title and abstract. The full text was obtained from publications that met the inclusion criteria. Data collection and analysis: Two reviewers independently extracted data using the keywords: conventional, self-ligating, biofilm, Streptococcus mutans, and systematic review; and independently evaluated the quality of the studies. In case of divergence, the technique of consensus was adopted. RESULTS: The search strategy resulted in 1,401 articles. The classification of scientific relevance revealed the high quality of the 6 eligible articles of which outcomes were not unanimous in reporting not only the influence of the design of the brackets (conventional or self-ligating) over adhesion and formation of colonies of Streptococcus mutans, but also that other factors such as the quality of the bracket type, the level of individual oral hygiene, bonding and age may have greater influence. Statistical analysis was not feasible because of the heterogeneous methodological design. CONCLUSIONS: Within the limitations of this study, it was concluded that there is no evidence for a possible influence of the design of the brackets (conventional or self-ligating) over colony formation and adhesion of Streptococcus mutans. .

OBJETIVO: verificar, por meio de uma revisão sistemática, se o design dos braquetes (convencionais ou autoligáveis) apresenta influência na aderência e formação de colônias de Streptococcus mutans. MÉTODOS: quatro bases de dados (Cochrane Central Register of Controlled Trials; Ovid ALL EMB Reviews; PubMed e BIREME) foram selecionadas para a busca por artigos relevantes, do período de janeiro de 1965 a dezembro de 2012. Os critérios de seleção foram inicialmente aplicados aos títulos e abstracts e o texto integral foi obtido de publicações que cumprira os critérios de inclusão. Dois revisores, de forma independente, extraíram os dados utilizando as palavras-chave "convencionais", "autoligados", "biofilme", "Streptococcus mutans" e "revisão sistemática" e avaliaram a qualidade metodológica dos estudos incluídos. No caso de divergência, foi adotada a técnica do consenso. RESULTADOS: a estratégia de busca resultou em 1.401 artigos. A classificação da relevância científica revelou alta qualidade dos 6 artigos elegíveis, cujos desfechos não foram unânimes em relatar a influência do design dos braquetes (convencionais ou autoligáveis) sobre a aderência e a formação de colônias de Streptococcus mutans, e que outros fatores como características dos tipos de braquetes, o nível de higiene bucal individual, colagem e idade dos indivíduos, podem ter maior influência. O tratamento estatístico foi inviável por causa do desenho metodológico heterogêneo. CONCLUSÕES: dentro das limitações do presente estudo, concluiu-se que não há evidência de uma possível influência do design dos braquetes (convencionais ou autoligáveis) sobre a aderência e a formação ...

Superficial morphology and mechanical properties of in vivo aged orthodontic ligatures

INTRODUCTION: The degradation of elastic ligatures in the oral environment results in the need of periodic replacement to maintain the optimal force during the orthodontic treatment. The purpose of this study was to perform a clinical prospective randomized study of the degradation of orthodontic elastomeric ligatures in the oral environment by scanning electron microscopy (SEM) and tensile strength test. METHOD: Two hundred elastic ligatures were randomly selected and placed around the brackets of 5 volunteers and removed in groups of 10, at different times (1, 2, 3, and 4 weeks). The control group was performed by another fifty ligatures which were not submitted to the oral degradation. The analyses were done by scanning electron microscopy (SEM) and strength mechanical test. RESULTS: The tensile strength test results showed reduction in the ultimate strength values after four weeks ageing in the oral environment and no statistical difference in the yield strength values (p < 0.05). The orthodontic elastomeric ligatures surface was significantly degraded in the oral cavity after four weeks. The elastomeric degradation began in the first week when the increase in the roughness could be detected just in some areas. Afterwards, the surface became gradually rougher and, after 4 weeks, it was totally rough with some crack areas. CONCLUSIONS: The elastic ligatures aged in the oral environment showed higher superficial degradation and lower loss of mechanical properties after the maximum experimental period.

INTRODUÇÃO: a degradação das ligaduras elásticas no ambiente bucal resulta na necessidade de substituição periódica para manter-se a força ótima durante o tratamento ortodôntico. OBJETIVO: a proposta desse trabalho foi realizar um estudo clínico prospectivo randomizado da degradação de ligaduras elásticas ortodônticas envelhecidas no ambiente bucal por microscopia eletrônica de varredura e por ensaio de tração. MÉTODOS: duzentas ligaduras foram randomicamente selecionadas e inseridas ao redor dos braquetes de 5 pacientes voluntários e, então, removidas, em grupos de 10, após diferentes tempos (1, 2, 3 e 4 semanas). O grupo controle foi formado por outras 50 ligaduras que não foram submetidas à degradação intrabucal. RESULTADOS: o ensaio mecânico demonstrou diminuição no limite de resistência à fratura após 4 semanas de degradação e não demonstrou diferença estatisticamente significativa no limite de elasticidade. A análise por microscopia eletrônica de varredura revelou que a superfície dos elastômeros tornou-se significativamente degradada após 4 semanas. A degradação teve início na primeira semana, quando o acréscimo de rugosidade superficial pôde ser detectado em algumas áreas. Posteriormente, a superfície tornou-se gradativamente mais rugosa, sendo que após 4 semanas toda a região apresentou-se rugosa e com algumas fraturas superficiais. CONCLUSÕES: as ligaduras elásticas envelhecidas no ambiente bucal apresentaram maior degradação superficial e menor perda das propriedades mecânicas após o período experimental máximo.

Changes of pulp-chamber dimensions 1 year after rapid maxillary expansion.

INTRODUCTION: The purpose of this study was to examine the effect of orthopedic forces on maxillary first molars' and maxillary central incisors' pulp chambers in children having rapid maxillary expansion as the only intervention compared with children having no orthodontic intervention by using cone-beam computed tomography images. METHODS: In this prospective controlled clinical study, we evaluated 60 maxillary first molars and 60 maxillary central incisors from 30 children (18 boys, 12 girls) in the mixed dentition and during the pubertal growth period. The treated group had rapid maxillary expansion with the Haas expander, followed by 6 months of retention and 6 months of follow-up out of retention; the control group had no intervention during the study. Cone-beam computed tomography scans were taken initially and 1 year after the rapid maxillary expansion active phase. Initially, a 3-dimensional scrolling in all pulp chambers of the evaluated teeth was performed with Dolphin Imaging software (version 11.0; Dolphin Imaging & Management Solutions, Chatsworth, Calif) to describe the incidence of pulp-chamber calcifications. The dimensions of the pulp chambers of the molars and incisors were also investigated. Cross-sectional and longitudinal slices were used for each molar (coronal and axial slices) and incisor (sagittal and axial slices). The area (mm(2)) was obtained from 3 slices of each kind (6 measurements for each tooth). RESULTS: The results suggest that rapid maxillary expansion did not induce new pulp-chamber calcification. Also, it did not interfere in normal pulp-chamber dimension changes of the anchorage molars. CONCLUSIONS: The pulp chamber of the central incisors can be expected to be minimally wider 1 year after the therapy.

Influence of certain tooth characteristics on the esthetic evaluation of a smile

OBJECTIVE: To assess the influence of certain dental characteristics on the perception of smile esthetics by undergraduate dentistry students. METHODS: Ten digital photographs of a woman's smile were modified using Adobe Photoshop software. The following changes were performed: stain removal; incisal edge straightening; gingival leveling; closure of black triangles. A group of 60 undergraduate dental students evaluated the original photograph and the altered images using a visual analog scale to evaluate smile esthetics. Intraexaminer agreement was checked for 30 examiners using the Student t test; for casual error, the Dahlberg formula was used. Data were described as means and standard deviations, and reported in tables. RESULTS: There were no statistically significant differences between the first and second scores assigned by examiners (p>0.05) in any of the comparisons made. The results of systematic error for the method indicated that the measures obtained were reliable. ANOVA was used to test equality of means, and the level of significance was set at 5%. Equality of variances was evaluated using Levene's test, and results revealed that variances were equal. Multiple comparisons using the Tukey's test revealed statistical significance at a 5%level for the presence of black triangular space. No significant values were found for other comparisons. CONCLUSIONS: Some dental characteristics were perceived by undergraduate students, and the black triangular space was classified as the most unfavorable characteristic.

Immunosuppressants: implications in Orthodontics

INTRODUCTION: There are medications capable of affecting bone metabolism and the rate of tooth movement. Among these medications are the immunosuppressants, which act by repressing the action of T lymphocytes, however they can cause bone loss and consequently lead to osteoporosis. Osteoporosis is a common complication following kidney, heart, liver or lung transplantation. The immunosuppressant treatment for preventing organ rejection after transplantation, in general, includes glucocorticoids, cyclosporine, tacrolimus, and sirolimus. All these drugs can have jeopardizing effects on bone mineral homeostasis and consequently influence tooth movement. In recent years, however, the increasing use of immunosuppressants has raised questions about their effects on bone metabolism in patients undergoing orthodontic treatment. OBJECTIVE: The objective of this review study was to inform orthodontists about the influence of immunosuppressants on bone metabolism and tooth movement.

Bone mineral density.

OBJECTIVE: To verify whether bone mineral density (BMD) of cortical bone, trabecular bone, and total bone influence the primary stability of orthodontic miniscrews and to verify whether there is a correlation between the measurement of BMD by cone-beam computed tomography (CBCT) and central dual-energy x-ray absorptiometry (DEXA). MATERIALS AND METHODS: Twenty bovine bone sections were extracted from the pubic and iliac bones from regions with cortical thicknesses of approximately 1 mm. The BMD of the total bone block was evaluated using two methods: CBCT and DEXA. The BMD of cortical, trabecular, and total bone in the region of interest (ROI) were also evaluated by CBCT. After scanning the bone blocks, 20 self-drilling miniscrews (INP®) 1.4 mm in diameter and 6 mm long were inserted into them. The peak implant insertion torque (IT) was registered. After this, the pull-out test (PS) was performed and the maximum force registered. The Pearson correlation test was applied to verify the correlations between variables. RESULTS: The BMD of the total bone block verified by CBCT and DEXA showed a positive and strong correlation (r  =  0.866, P  =  .000). The BMD of the ROI for cortical bone influenced the IT (r  =  0.518, P  =  .40) and the PS of miniscrews (r  =  0.713, P  =  .001, Table 2). However, the total bone BMD (verified by CBCT and DEXA) and trabecular bone BMD presented weak and not statistically significant correlations with primary stability. CONCLUSIONS: There was a positive correlation between total bone block BMD measured by DEXA and CBCT. The cortical BMD influenced the IT and PS.

In situ evaluation of orthodontic elastomeric chains

The hypothesis tested in this study was that intraoral exposure of elastomeric chains alters their tensile strength. For such purpose, it was evaluated the in situ behavior of different elastomeric chains stretched for 3 weeks. Three kinds of elastomeric chains, Plastic chain (PC), Memory chain (MC) and Super slick chain (SSC), were randomly placed in 3 quadrants of 13 patient in a fixed distance of 16 mm and mean initial force of 180 g. Tensile testing was performed in an universal testing machine at different intervals: initial, 1 h, 24 h, 1 week, 2 weeks and 3 weeks. A two-way ANOVA test was performed to identify the influence of both material and time on the force decrease. A subsequent one-way ANOVAtest with the Tukey's post hoc test was used to identify statistically significant intragroup and intergroup remaining force (g and %) differences at 5% significance level. The effect of both the material and the time factors were significant. All groups showed significant force decrease after the 1-h period (23% for PC and 14% for MC and SSC). At the end of the 3-week period, the remaining force was 57% (96 g), 67% (129 g) and 71% (125 g) for PC, MC and SSC, respectively. In conclusion, intraoral exposure of elastomeric chains altered their tensile strength. In general, the greater force decrease occurred within the first hour. The remaining force of the enhanced chains measured at each time interval was greater than the conventional one (PC). After 3 weeks, only the enhanced chains maintained the force applied over 100 g.

A hipótese testada foi que a exposição dos elásticos em cadeia ao meio bucal altera sua força de tensão. Portanto, o objetivo deste estudo foi avaliar o comportamento, in situ, de diferentes cadeias elastoméricas quando tensionadas durante 3 semanas. Três tipos de elásticos em cadeia Plastic Chain (PC), Memory Chain (MC) e Super Slick Chain (SSC) foram inseridos aleatoriamente em 3 dos quadrantes de 13 pacientes com distância fixa de 16 mm e força inicial de 180 g. Foi realizado ensaio de tração em uma máquina de ensaio universal EMIC nos seguintes intervalos: inicial, 1 h, 24 h, 1 semana, 2 semanas e 3 semanas. O teste ANOVA a dois critérios foi aplicado para verificar a influência do material e do tempo na degradação da força. Subsequentemente, foi utilizado o teste ANOVA a um critério e pós-teste de Tukey para identificar diferenças estatísticas (p<0,05), intra-grupo e inter-grupo, na força remanescente (g e %). Tanto o material quanto o tempo tiveram efeito significativo na degradação da força. Todos os grupos mostraram diminuição significativa da força depois de 1 h sob tensão (23% para o PC e 14% para o MC e SSC). Ao final do período de 3 semanas, a força remanescente foi de 57% (96 g), 67% (129 g) e 71% (125 g) para o PC, MC e SSC, respectivamente. A exposição dos elásticos em cadeia ao meio bucal alterou a força de tensão. No geral, a maior diminuição da força ocorreu na primeira hora. A força remanescente testada em cada intervalo foi maior para os elásticos reforçados (MC e SSC) do que para o elástico convencional (PC). Após 3 semanas, apenas os elásticos reforçados mantiveram a força acima de 100 g.

Is miniscrew primary stability influenced by bone density?

Primary stability is absence of mobility in the bone bed after mini-implant placement and depends on bone quality among other factors. Bone quality is a subjective term frequently considered as bone density. The aim of this preliminary study was to evaluate bone density in two bovine pelvic regions and verify the primary stability of miniscrews inserted into them. Forty bone blocks were extracted from bovine pelvic bones, 20 from iliac and 20 from pubic bone, all of them containing cortical bone about 1 mm thick. Half of the sections extracted from each bone were designated for histological evaluation of bone density (trabecular bone area - TBA) and the other half for bone mineral density (BMD) evaluation by means of central dual-energy X-ray absorptiometry (DEXA). Then, twenty self-drilling miniscrews (INP®, São Paulo, Brazil) 1.4 mm in diameter and 6 mm long were inserted into the bone blocks used for BMD evaluation. Peak implant insertion torque (IT) and pull-out strength (PS) were used for primary stability evaluation. It was found that iliac and pubic bones present different bone densities, iliac bone being less dense considering BMD and TBA values (P > 0.05). However, the miniscrew primary stability was not different when varying the bone type (P < 0.05). IT and PS were not influenced by these differences in bone density when cortical thickness was about 1 mm thick.

Is miniscrew primary stability influenced by bone density?

Primary stability is absence of mobility in the bone bed after mini-implant placement and depends on bone quality among other factors. Bone quality is a subjective term frequently considered as bone density. The aim of this preliminary study was to evaluate bone density in two bovine pelvic regions and verify the primary stability of miniscrews inserted into them. Forty bone blocks were extracted from bovine pelvic bones, 20 from iliac and 20 from pubic bone, all of them containing cortical bone about 1 mm thick. Half of the sections extracted from each bone were designated for histological evaluation of bone density (trabecular bone area - TBA) and the other half for bone mineral density (BMD) evaluation by means of central dual-energy X-ray absorptiometry (DEXA). Then, twenty self-drilling miniscrews (INPÒ, São Paulo, Brazil) 1.4 mm in diameter and 6 mm long were inserted into the bone blocks used for BMD evaluation. Peak implant insertion torque (IT) and pull-out strength (PS) were used for primary stability evaluation. It was found that iliac and pubic bones present different bone densities, iliac bone being less dense considering BMD and TBA values (P > 0.05). However, the miniscrew primary stability was not different when varying the bone type (P < 0.05). IT and PS were not influenced by these differences in bone density when cortical thickness was about 1 mm thick.